Revision as of 12:48, 14 September 2017

VoIP monitor sniffer can be installed in two ways - either as static binary which will run on any Linux distribution with kernels >= 2.6.18 or compiled from sources.

Latest Static binary

Static binary for 32bit,64bit or Arm arch can be downloaded from http://www.voipmonitor.org/download pages.

Step by step for 64bit linux procedure

wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh

Step by step for 32bit linux procedure

wget https://www.voipmonitor.org/current-stable-sniffer-static-32bit.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh

Step by step for ArmV6(RPI) linux

wget https://www.voipmonitor.org/current-stable-sniffer-static-armv6k.tar.gz --content-disposition --no-check-certificate
tar xzf voipmonitor-*-static.tar.gz
cd voipmonitor-*-static
./install-script.sh

Older static versions and versions with SS7(wireshark) module

If you need for any reason to install older version of a sniffer or version including wireshark's SS7 module follow:

Install sniffer version of your choice

Find voipmonitor*.tar.gz file of your choice at following site https://sourceforge.net/projects/voipmonitor/files/ and use the link for wget command in step by step above

Example of wget command for version 20.4.4 with ss7(wireshark) module

wget https://sourceforge.net/projects/voipmonitor/files/20.4/voipmonitor-wireshark-amd64-20.4.4-static.tar.gz/download -O voipmonitor-wireshark-amd64-20.4.4-static.tar.gz --content-disposition --no-check-certificate

Configuration of a sniffer

Now edit configuration file /etc/voipmonitor.conf and run voipmonitor

/etc/init.d/voipmonitor start

Systemd script for bringing up voipmonitor service at a boot time

If your system uses systemd for services management create a systemd startup script

Compile shared binary

Please see README.* inside the sources (we recommend to use the static version)

git clone https://github.com/voipmonitor/sniffer.git

@@ Line 1: / Line 1: @@
 VoIP monitor sniffer can be installed in two ways - either as static binary which will run on any Linux distribution with kernels >= 2.6.18 or compiled from sources.
-= Static binary =
+= Latest Static binary =
-Static binary for 32bit or 64bit can be downloaded from http://www.voipmonitor.org/download pages. Step by step for 64bit linux procedure:
+Static binary for 32bit,64bit or Arm arch can be downloaded from http://www.voipmonitor.org/download pages.
- # Stop sniffer service first,if its running
- /etc/init.d/voipmonitor stop
- # In case it won't stop, press CTRL+C and use KILL signal to terminate the process with a force:
- kill -9 `pgrep voipmonitor`
- #download unpack and run install script. If you are upgrading already installed sniffer, answer "no" If to overwrite /etc/voipmonitor.conf.
+== Step by step for 64bit linux procedure ==
   wget https://www.voipmonitor.org/current-stable-sniffer-static-64bit.tar.gz --content-disposition --no-check-certificate
   tar xzf voipmonitor-*-static.tar.gz
@@ Line 16: / Line 12: @@
   ./install-script.sh
-  # Now edit configuration file /etc/voipmonitor.conf and run voipmonitor
+== Step by step for 32bit linux procedure ==
+  wget https://www.voipmonitor.org/current-stable-sniffer-static-32bit.tar.gz --content-disposition --no-check-certificate
+ tar xzf voipmonitor-*-static.tar.gz
+ cd voipmonitor-*-static
+ ./install-script.sh
+== Step by step for ArmV6(RPI) linux ==
+ wget https://www.voipmonitor.org/current-stable-sniffer-static-armv6k.tar.gz --content-disposition --no-check-certificate
+ tar xzf voipmonitor-*-static.tar.gz
+ cd voipmonitor-*-static
+ ./install-script.sh
+= Older static versions and versions with SS7(wireshark) module =
+If you need for any reason to install older version of a sniffer or version including wireshark's SS7 module follow:
+== Install sniffer version of your choice ==
+Find voipmonitor*.tar.gz file of your choice at following site https://sourceforge.net/projects/voipmonitor/files/ and use the link for wget command in step by step [https://wiki.voipmonitor.org/doc/index.php?title=Sniffer_installation&action=submit#Step_by_step_for_64bit_linux_procedure above]
+=== Example of wget command for version 20.4.4 with ss7(wireshark) module ===
+ wget https://sourceforge.net/projects/voipmonitor/files/20.4/voipmonitor-wireshark-amd64-20.4.4-static.tar.gz/download -O voipmonitor-wireshark-amd64-20.4.4-static.tar.gz --content-disposition --no-check-certificate
+= Configuration of a sniffer =
+Now edit configuration file /etc/voipmonitor.conf and run voipmonitor
   /etc/init.d/voipmonitor start
+= Systemd script for bringing up voipmonitor service at a boot time =
 If your system uses systemd for services management create a [https://wiki.voipmonitor.org/doc/Systemd_for_voipmonitor_service_management systemd startup script]
 = Compile shared binary =

Difference between revisions of "Sniffer installation"