Difference between revisions of "Audiocodes tunneling"
Jump to navigation
Jump to search
(Created page with "==How to set voipmonitor== ===Basic options=== Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets proc...") |
|||
| Line 4: | Line 4: | ||
Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets procssing | Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets procssing | ||
| − | audiocodes=yes | + | audiocodes = yes |
#choose which transport protocol will be used for audiocodes and enabled the option | #choose which transport protocol will be used for audiocodes and enabled the option | ||
| − | udp_port_audiocodes=925 | + | udp_port_audiocodes = 925 |
| − | tcp_port_audiocodes=925 | + | tcp_port_audiocodes = 925 |
===Special options=== | ===Special options=== | ||
Revision as of 13:22, 3 May 2023
How to set voipmonitor
Basic options
Following options needs to be enabled in the sniffer service configuration in /etc/voipmonitor.conf for audiocodes packets procssing
audiocodes = yes #choose which transport protocol will be used for audiocodes and enabled the option udp_port_audiocodes = 925 tcp_port_audiocodes = 925
Special options
Following options helps you in case that also the pure (non-encapsulated) packets are visible to voipmonitor (of a same call - where are also packets encapsulated w audiocodes). The options specifies conditions which rtp/rtcp packets should be assigned to CDR.
audiocodes_rtp = no/YES/only/only_for_audiocodes_sip audiocodes_rtcp = no/YES/only/only_for_audiocodes_sip
where the values means:
no - means no process rtp/rtcp encapsulated by audiocodes yes - means process rtp/rtcp encapsulated by audiocodes - default YES only - assigns only RTP/RTCP packets encapsulated by audiocodes to SIP sessions/CDRs (will not assigns pure RTP packets if observed as well, no matter if SIP arrived via audiocodes or not) only_for_audiocodes_sip - means that RTP/RTCP packets encapsulated in audiocodes will be assigned only in case that SIP packets for this call were audiocodes encapsulated as well.